2" 50mm 15 kg/cm2 Oil Manometer Center Back Copper Alloy Connection Utility Pressure Gauge
Description
The (relative) simplicity of pressure gauges derives from the fact that the pressure measured by the gauge is the only energy source necessary for the gauge to work. At the end of the production process, pressure gauges are calibrated according to the pressure readings of a “master” gauge that already exists. Once this is accomplished, the gauge is ready for use. Gauges are typically able to be installed at various points on a fluid power system (e.g. near a hydraulic pump’s pressure port, at a stand-alone regulator in a pneumatic or compressed air system, etc.). Sometimes, pressure gauges are even able to measure “sub-circuits” within a fluid power system that operate at different pressures than the rest of the overall system (e.g. a circuit that occurs after a reducing valve).
Applications
For gaseous and liquid media that are not highly viscous or crystallising and will not attack copper alloy parts.
Pneumatics
Heating and air-conditioning technology
Medical engineering
Special features
Reliable and cost-effective
Design per EN 837-1
Nominal size 40, 50, 63, 80, 100 and 160
Scale ranges up to 0 ... 400 bar
Specifications
| Design | EN 837-1 |
| Nominal size | 50mm, 2" |
| Accuracy | 2.5 |
| Pressure range | 15 kg/cm2 (customized) |
| Pressure limitation | Steady: 3/4 x full scale value
Fluctuating: 2/3 x full scale value
Short time: full scale value |
| Permissible temperature | Ambient: -20 ... +60 °C
Medium: +60 °C maximum |
| Temperature effect | When the temperature of the measuring system deviates from the reference temperature (+20 °C): max. ±0.4 %/10 K of the span |
| Process connection | Brass |
| Pressure element | Brass, C-type or helical type Bourdon tube |
| Movement | Brass |
| Dial | Aluminium, white, with pointer stop pin
Black/red lettering |
| Pointer | Aluminium |
| Case | Black steel |
| Window | PC |
| Options | Other process connection
Surface mounting flange
Mounting bracket |
Dimensions
lower mount (radial)
| Dial Size | Dimensions in mm | Weight in kg |
| a | b | D | G | h | SW |
| 40 | 9.5 | 26 | 39 | G1/4 | 36 | 14 | 0.08 |
| 50 | 10 | 27.5 | 49 | G1/4 | 45 | 14 | 0.10 |
| 63 | 9.5 | 27.5 | 62 | G1/4 | 53.5 | 14 | 0.13 |
| 80 | 11.5 | 30 | 79 | G1/2 | 72 | 22 | 0.18 |
| 100 | 11.5 | 30.5 | 99 | G1/2 | 83.5 | 22 | 0.21 |
| 160 | 15.5 | 42 | 160 | G1/2 | 115.5 | 22 | 0.85 |
back mount (axial)
| Dial Size | Dimensions in mm | Weight in kg |
| b1 | b2 | D | G | SW |
| 40 | 26 | 42 | 39 | G1/8 | 14 | 0.06 |
| 50 | 29.5 | 47.5 | 49 | G1/4 | 14 | 0.07 |
| 63 | 29 | 47 | 62 | G1/4 | 14 | 0.08 |
| 80 | 32 | 49 | 79 | G1/4 | 14 | 0.11 |
| 100 | 31 | 49 | 99 | G1/4 | 14 | 0.26 |
Ordering information
Model / Dial size / Pressure Range / Process connection / Options
Product Tags:
|
|
Copper Alloy Connection Utility Pressure Gauge 50mm 15 Kg/Cm2 Oil Manometer Images
|
